Applications:
1979-1985 – Cadillac – Eldorado
2003-2009 -Cadillac -XLR
1977-1987 – Chevrolet – Impala
1987-2005 -Chevrolet – Blazer
1977-1987 -Chevrolet -Caprice
1982-2003 – Chevrolet -Camaro (May not fit Front Hub, contact us for more details)
1982-2004 – Chevrolet – S10 (Won’t fit front hub of 2WD Models
1982-2004 -Chevrolet – S10 Blazer (Won’t fit front hub of 2WD Models)
1982-1991 – GMC – S15
1990-2005-GMC-Jimmy
1990-2004 -GMC- Sonoma (Does not fit front hub of 2-wheel drive)
1967-2002 – Pontiac – Firebird (May not fit Front Hub, contact us for more details)
1964-1987 – Pontiac – GTO
1980-1985 – Pontiac – Phoenix
1984-1997 -Pontiac-Trans Am
1990-1997 – Pontiac – Trans Sport
Important Notes:
– Installation should only be performed by a trained professional.
-Make sure you get 6-8 FULL TURNS of the lug nuts before tightening.
-Failure to follow proper procedures may cause your lug nuts to come undone while driving!
– Your OEM/Factory wheel studs may extend past the surface of the spacer, if this is the case, you have 3 options.
1) Your wheels need to have cavities on the back between the mounting holes
2)The OEM/Factory studs will need to be shortened
3) You can purchase shorter studs and install them on your hub
– No returns or exchange once installed
-Please be sure to take the proper measurements before making your purchase. The Buyer is responsible for making sure that they choose the correct thickness so as to not cause the wheel/tire to rub against the fender of the vehicle.
Product Features
- 【5×4.75 to 5×4.75 hub centric wheel spacers FITMENT】82-91 GMC S15 90-05 GMC Jimmy 79-85 Cadillac Eldorado 03-09 Cadillac XLR 77-87 Chevrolet Impala 87-05 Chevrolet Blazer 77-87 Chevrolet Caprice 68-13 Chevrolet Corvette 64-87 Pontiac GTO 80-85 Pontiac Phoenix 84-97 Pontiac Trans Am 90-97 Pontiac Trans Sport
- 【5×4.75 WHEEL SPACERS PARAMETER】Brand New Wheel Spacers. Bolt Pattern: 5×120.65 or 5×4.75 or 5×120.7. Hub Bore: 70.5mm. Outer Diameter(6.102 inch),Spacer Thickness: 76mm (3.0 inch). Stud/Nut Thread Pitch: 12mm x 1.5
- 【3 inch hub centric WHEEL SPACERS】Hubcentric Wheel Spacers with Wheel-Centric Lip. This means it will fit perfectly over your hub – eliminating possibility of vibrations. Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers
- 【12×1.5 Wheel Spacers ADVANTAGE】The Wheel Spacers widen your vehicle wheels base by allowing for a more aggressive stance,eliminate rubbing easily and instantly,greatly improve the vehicle stability.
- 【WHEEL SPACERS hub centric SAFETY】The Wheel spacers are made from the best true T-6 billet aluminum,to ensure the highest level of performance and durability for your vehicles.The studs of our Wheel spacers are grade 10.9,heat treated and hardened heavy duty studs for safety.
WORTH THE BUY These are amazing. If you’re looking to run 275 rear and 245-255 front on a third gen fbody these are perfect. The 2″ ones have the wheels sitting too close to the fender well. They come in durable packaging and have a nice finish to them. Had them.in for about two months and they’re holding up extremely well. A necessary investment. And make sure they’re hubcentricâ¼ï¸
Works great just remember to get some longer studs your factories … Works great just remember to get some longer studs your factories are to short I used these on my 91 s10 so that I could use a c5 corvette wheels on the back and used a 2″ spacer for the front
tight fit hand to clean rust and build up around axle hub but worked perfectly good quality