ACDelco GM Original Equipment Power Window Motor and Regulator Assembly is a GM-recommended replacement component for one or more of the following vehicle systems: cooling, hvac, body-electrical and lighting, and/or wiper and washer. This original equipment assembly will provide the same performance, durability, and service life you expect from General Motors.
Product Features
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
… side of my 2000 C5 corvette and it works great. No plug adapter was necessary for the drivers … I replaced the window regulator on the drivers side of my 2000 C5 corvette and it works great. No plug adapter was necessary for the drivers side. Definitely recommend this part and take your time with the install. Mark the bolt position under the door by outlining the bolt head with a sharpie to help with the position when installing the new regulator. Also note the old regulator bolt that is located behind the door reflector since this can also be adjusted by screwing the bolt in or out. I…
Perfect fit for 99 FRC Nothing in stock locally, so ordered this one even though this is a bit more than the one from Zip – It’s OEM so it should last for a while.Put it on my 99 FRC corvette with no problems. So kudos to AC Delco.If you need to do this fix, there is a good write up at Vette Magazine “How to Install New Window Regulators in Your C5 – Regulators, Mount Up!”Just remember to use a thick sharpie permanent marker to outline the existing position of the windows on…
Pretty easy to install Perfect fit in my 2004 corvette. Very easy to install. I’m not a corvette mechanic by any stretch of the imagination but I was able to put this in by myself. Just look at a couple youtube videos and go from there. I would watch the videos first to see what the install consists of and the tools you will need. Most people already have these tools in their garage. 10mm deepwell socket and ratchet. 14mm socket, T30 torx bit, flat screwdriver. And you will have to remove the door speaker. I believe…