Specifications:
– Size: 98-3/8″L x 2-9/16″W(250×6.5cm)
– Weight: 1.87Lbs
Installation method:
1. Convenient installation – the length can be adjusted to the best position of your car.
2. Clean the bottom of the bumper, preferably using alcohol to install the lip, which will ensure a firm combination with the bumper case.
3. Then peel off the double-sided tape and attach it to the front bumper lip. The degree of adhesion (adhesion or screw) can be selected. In order to achieve better adhesion effect, we recommend using screw and screws included in the package.
4. Install at the bottom of the bumper, starting from the end of the bumper.
5. Quick and easy way to add a front bumper lips, is almost any car aggression and reduce the appearance of flexible and durable materials, rubber carbon fiber design allows you to install the lower bumper.( The front lip of the car must be equipped with a self tapping screw, it is installed. Since the vibration wave of the automobile engine is relatively large, the screw will make (bumper separator/spoiler plate) stronger and will not fall off. Cut off the excess with scissors (note: don’t clean your car within 48 hours, glue should be fixed after 12 hours)
NOTE: ★If you need a stronger, more permanent attachment, you amy use self-taping screws to secure the lip to the bumper.
Package Contents:
Front Bumper Lip*1
Screws*5
Product Features
- 🍀 Quality automotive tape will not be affected by wet or cold weather and will easily endures all all types of weather, car washes and high speeds.
- 🍀 Carbon lip is a Easy to bend and conform to the shape of the bumper,Easy installation and good adhesion.
- 🍀 Front lip Universal for most cars, trucks, SUV with easy to use 2.5M automotive tape.
- 🍀 Guard protection bumper spoiler rubber skirt, anti-scratch and decorative.while protecting your vehicle from curbs and scrapes.
- 🍀 Size: 6.6 x 4 x 2 inches
Surprised Great product thick like my ex n looks good you feel me
Bang for your buck There’s no quicker way to make your car look cool other than adding this lip on your car. Quick to install and last quiet a long time. Unfortunately this is my 2nd time buying the lip because of my steep drive way. Eventually the glossy-ness of the lip will disappear, giving the dry carbon look to it ( which is a plus). Make sure you replace the double sided tape with the heavy-duty double sided tape (30LBS) that you can buy from homedepot. Otherwise the lip will fall eventually. Add some…
Works great. It was long enough for my Toyota Corolla Hatchback. You will need help putting it on, 2 person job.