4″ Fender Hash Mark Racing Stripes, Both Sides (Fits Chevy CORVETTE C4 & fits most any cars or trucks). Whats included: 1. 4″ x 20″ = 2 hash mark for each side. These Racing Stripes are made of carbon fiber vinyl, This is NOT REAL CARBON FIBER. About the vinyl: Our Vinyl is a dual cast file specifically designed to provide dimensional stability and durability without the need for an over laminate. The pressure-activated adhesive allows you to re-position the film until you apply firm pressure. Installation Recommendations: This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. We would highly suggest using a 3M primer 94 or professional installation. Instructions: 1. Locate location with painters tape, remove backing paper and apply to desired location. 2. Squeegee any air bubbles out, be sure the squeegee has a cloth on it when using on the vinyl. Trim excess. We are not responsible for improper installation. If you have any questions before you purchase, please email us.
Product Features
- Quality Materials – 5D Glossy Carbon Fiber vinyl
- Installation info: When installing the racing stripes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. Dry application only.
- 4″x20″ = 2 for each side, 4 total
- Re-positional vinyl for trouble-free install
- Stretchable with heat
I will order again Great fit