FEATURED Edelbrock 1721 Performer Series Street Fuel Pump
- Unique valve design improves flow quantity and quality
- No regulator required for the fuel pump
- Produces 6 PSI, which is ideal for street performance applications
- Includes 3/8″ NPT inlet and outlet ports
- Designed for use with gasoline or blended fuels
The Edelbrock Performer Series Street Fuel Pumps are designed to match the Performer Series Carburetors. They have six valves and a free-flow capacity of 110 gallons per hour. The fuel pumps have a unique valve design that improves flow quantity and quality, and can support engines with up to 550 horsepower.
67Camaro,
You need to tap every other hole (Edelbrock drilled but did not tap) so you can rotate the inlet/outlet so this will work on a 67 Camaro. The inlet and the outlet fittings rotate together. You cannot rotate them separately.
Was this review helpful to you?
have not installed as of yet,won’t till spring of 2011.,
I bought the better fuel pump so I would’nt run into any problems I have confidence in edelbrock equipment. It’s for a 34’chevy that’s in storage now.
Was this review helpful to you?
Great pump,
This fuel pump works great. I needed to add a fuel pressure regulator to get it to work well with my tri-power setup (three Rochester 2 bbl carbs) because Rochesters do better with only about 4 psi, but otherwise I had no problems at all with this pump. I have about 400 horsepower and this pump delivers all the fuel I need. I figured why mess with electric pumps when you can have a simple mechanical pump like this that works fine without any hassles? It’s a little bigger than a stock mechanical pump, so you might want to consider that if you don’t have much clearance in that area. The big red sticker stuck out like a sore thumb on my traditional style hot rod, but it was easy to peel it off.
Was this review helpful to you?