These 1157-54SMD LED bulbs with projector will upgrade your car with Extremely Bright light to make you see More Clearly when backing up! Best value in the market!
ENDPAGE is the Amazon registered brand and specialized in LED Lights for several years. We are committed to produce more energy conservative and
longer lifespan LED bulbs with our advanced technology. We love our customers and offer a “ONE YEAR” return or replacement guarantee from purchase date.
Safe Driving Is Key
This 1157 dual-contact bulb has 54 LEDs (2835 SMD) that create a 360° viewing angle for better, allover light emission to upgrade your car with super bright
light at night to make a clear image on reverse camera video and alert other divers earlier as well.
Dual function: 1.1W on Dim mode for Tail/DRL lights and 5.6W on Bright mode for Brake/Reverse or Turn Signal lights, which make a big difference from
low to high. Please note that the bulbs are in bright mode when installed for only one function.
Cross reference: 1157, 2057, 2357, 7528, BAY15D, 1016, 1034, 1157A, 1178A, 1196, 2057A, 2357A, 2357NA, 2397, 3496, 94 etc.
Application: Back Up Reverse Lights, Tail Lights, Brake Lights, Turn Signal Lights, Daytime Running Lights(DRL), Brake Lights, Center High Mount Stop ( 3rd brake ) Lights, Parking Lights.
The energy-efficient bulb operates within a 10-30V DC range, will work great for 12V and 24V vehicles. And is designed to last up to 30,000 hours, 25 times longer
on your car, truck, SUV, or van than stock bulbs.
Please Note:
For TURN SIGNAL LIGHTS, the 50w 6-ohm load resistor or flasher relay needed to prevent the hyper flash or the bulb does not blink.
Please double check owners manual or original bulb size to confirm before placing an order, due to Amazon filter system may not be 100% accurate and the bulb size may vary between trim of your vehicle.
Product Features
- Output: 1300 Lumens per bulb | Lifespan: 30,000 Hours | Length: 2.1″; Diameter: 0.71″ | Operating Voltage: 10V-30V DC | Wattage: 1.1-5.6 Watts
- SAFE DRIVING: 54 high performance 2835 led chips per bulb give off 360 degree Extremely Bright white light, 300% brighter than original stock bulb, assuring you will be seen more clearly and from further away during daytime and night, providing other drivers more time to react.
- **ONE YEAR WARRANTY** guaranteed against manufacturer defect. Built with full Aluminum Housing for better heat distribution and built in stable Constant Current IC Driver for Longer lifespan- 25 times longer than halogen/incandescent bulbs. Buy with confidence!!! Each bulb was tested before shipping.
- Application: Tail Lights, Backup / Reverse Lights, Brake Lights, Turn Signal Lights, Daytime Running Lights(DRL), Center High Mount Stop (3rd brake) | Cross Reference: 1157, 2057, 2357, 7528, BAY15D, 1016, 1034, 1157A, 1178A, 1196, 2057A, 2357A, 2357NA, 2397, 3496, 94 etc. Easy plug and play installation.
- *ATTENTION* When used as Turn Signal Flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard.
Great improvement over stock bulbs I installed them in my John Deere E170 Lawn Tractor. The stock 1156 bulbs were 220 lumin each. These bulbs came in at 1625 lumen each. I measured the lux with a light meter app and used a conversion app to convert from lux to lumin per ft2. In a nutshell a pair of them are really bright. I’ll check them out in a month or two to see if there’s any loss. So far, great product!
Very bright. These are great. Very bright. I used them as tail/ brake lights on my motorcycle. Here is picture of the regulator lights on the right and the new LED lights on the left. It made a huge difference.
Nice bulbs. These were purchased for use in my ’16 Jeep grand Cherokee. First off, these bulbs look to be very well made. I was happy with the overall look and packaging. The JCG takes two types of bulbs to complete the upgrade to LED. One which goes in the tail light housing and the other in the lift gate. In regards to these bulbs, they do not quite fit right in the socket. You aren’t able to get them recessed enough for the little side clamps to lock down on the bulb. This wasn’t a big deal as…