The permanent solution to sun-faded
bumpers and trim moldings.
Forever Black Bumper & Trim Reconditioning Kit restores a dark, black, finish on sun-faded bumpers and body moldings. This is not a silicone dressing. Forever Black is an easy-to-use permanent dye. It permanently colors black plastic, rubber and vinyl with the same polymers that the manufacturers use.
Note: Silicone products will make plastic, vinyl and rubber appear to have regained their color but the change is temporary. Plus, silicone oils have been known to dry out the applied areas creating a bigger problem. Silicone also tends to leave a greasy residue even after buffing.
How is Forever Black Different?
Forever Black permanently dyes black plastic, rubber and vinyl.
Forever Black will completely cover the worst wax build-up or sun-faded trim.
Forever Black will not wash off.
Forever Black dries in 5 to 20 minutes. No buffing is required.
Once dried, Forever Black will not attract dust. There is no oily residue.
Forever Black has a UV sun screen to help shield against future fading.
The finish won’t wash off!
Forever Black will restore bumpers, spoilers, mud guards, door handles, body and trim moldings to a like new condition.
It’s quick and easy to use!
Each kit contains:
4 oz. of Cleaner Concentrate
4 oz. of Forever Black Dye.
Simply sponge surfaces to be treated with the cleaner to remove dirt, grease and dressings. Next, apply a coating of Forever Black using the shoe-dauber type applicator on the bottle. That’s it! No buffing is required. In 5 to 20 minutes, your trim will be permanently black!
Kit will cover the trim on at least two cars. (I usually can treat 3 or 4 cars from each kit.)
Product Features
- 4 oz. of Forever Black Cleaner Concentrate
- 4 oz. of Forever Black dye
- Provides coverage on an average of 3-4 cars.
- Lasts up to 50 car washes.
Answer to the Issue if used properly I have had few automobiles with black plastic trim that faded after time in the sun. I was a fan of putting on a silicone based product, but it would always “wash off” with the first rain. It was a pain to put it on every time I washed the car or wanted it to look good.This product is the answer ! Like the many reviews beyond one from this seller, the product is a dye. Like others have said, the applicator on the bottle is useless. Like others, I recommend a 1 to 1 1/2 foam paint…
Don’t Believe The Negative Reviews!! Great Product!! I have purchased this product several times now, and I have yet to have an issue or a complaint about the outcome after using it.I have used it on the black plastic and molding on several different vehicle makes and models, and I have yet to hear anything but praise on how good the vehicles look after completion. If you get anything but great results, chances are, you can chalk it up to bad preparation or user error!!As long as the pieces being treated are cleaned…
Wear gloves. Forever Black works very well. The … Wear gloves. Forever Black works very well. The 13-yr old black bumpers on my car were a lighter gray than any “before” photo I’d seen, so I was ready to apply a second coat of Forever Black: It wasn’t necessary! I used painter’s tape to mask along painted surfaces to reduce spillover. what little there was, rubbed off the paint with a damp cloth. At only three weeks since applying, I can’t say how long it will last, but there’s plenty left for a 2nd and maybe 3rd application.