This page features one piece self-adhesive JDM golden yellow vinyl film sheet in glossy finishing for headlights or fog lights.
The size is 12″ x 48″ (1′ x 4′), the sheet thickness is about 0.005 inches.
when you order:
Quantity 1: 12″ x 48″
Quantity 2: 2 separated pieces of 12″ x 48″ and so on….
Fitment:
Universal Fit. You can use this JDM golden yellow vinyl film for any headlights, fog lights, sidemarker lights or even top part of the windshield, etc.
Simply clean the surface and apply this high quality vinyl sheet to anything smooth surface and cut off the edge. It will not damage your lamp nor leave any residual later when you remove this.
Please note:
It is not pre-cut to any lamp’s exact shape.
Product Features
- 1 piece 12 by 48 inches
- Color: JDM Gold Yellow
- Self-adhesive, peel and stick
- Stretchable with heat and water resistant
- Easily cleansed with water and easy to remove without residual
Apply this product the same way you would the “high end” stuff and you’ll get EXCELLENT results!! I got really really great results the SECOND time around. I had a friend who does vinyl wraps professionally put it on for me both times. He scoffed at the idea of using this low-grade non-name-brand vinyl. I read the mfr’s recommended instructions, “peel and stick.”This did not work at all. The vinyl arrives sort of like a “Fruit Roll-Up,” it’s rolled, but is then crushed a little bit. If you do not use a heat gun or a hair dryer – – You WILL have creases…
Absolutely not a bad tint For what you’re getting, this tint isn’t terrible. Like others have mentioned, you’ll need many layers in order to get a deep yellow color. Remember, this is not an amber tint. Had to use 5 layers to convert into something with a very intense yellow output. I placed the film right behind the optics and directly on top of the LEDs which means the tint is in contact with something fairly hot. I did not experience…
Looks great but not a shortcut to selective yellow driving lights. This is some of the higher quality vinyl I have worked with. Although, admittedly I’ve only worked with vinyl on a hand full of products. It looks really good on whatever light you stick it too but it doesn’t really tint the light shining through. I used 3 layers on a set of LED pods i’m using as fog lights to change the color of the light output. The light is mostly yellow but slightly greenish which is kinda lame and bums me out a little. Its the only reason i’m giving it 4 stars and not…