iJDMTOY 18-SMD-5050 LED Strip Light For Car Trunk Cargo Area or Interior Illumination, Xenon White

This page features one piece (1) super bright 18-SMD LED Strip used to replace the center trunk or cargo area lamp to light up the entire trunk area.

It is only recommended to replace the trunk/cargo area lamp located in the middle of the trunk for max lighting output effect.

Fitment

There’s one T10 and one size adjustable festoon adapters in this package which will fit any wedge and festoon housings including:

168/194/2825 wedge housings
DE3175/DE3022 1.25″ long festoon housings
DE3425/6411/6418 1.50″ long festoon housings
560/578/211-2/212-2/214-2 1.72″ long festoon housings

Universal fit

Acura MDX RDX RL RSX TL TLX TSX
Audi A3 A4 A5 A6 Q5 Q7
BMW 1 2 3 4 5 6 7 series X1 X3 X5 X6 Z4
Cadillac CTS Escalade
Chevrolet Avalanche Camaro Colorado Cruze Malibu
Dodge Avenger Caliber Challenger Charger Dart Durango Neon Ram
Ford Edge Escape Explorer F-150 F-250 Fiesta Flex Focus Fusion Mustang
Honda Accord Civic CR-V CR-Z Fit Pilot Ridgeline
Hyundai Genesis Santa Fe Sonata Tucson
Infiniti EX35 FX35 FX45 FX50 G35 G37 M45 M35 M37 M45 M56 Q50 Q60 QX60
Jeep Grand Cherokee Wrangler
Lexus CT ES GS GX HS IS LS LX RX SC
Mazda 2 3 5 6 CX-5 CX-7 CX-9 Miata RX-8
Mercedes C CL CLA CLK CLS E GL GLA GLK ML R S
Nissan 350Z 370Z Altima Cube Frontier Juke Maxima Murano Rogue Sentra Titan Xterra
Scion FR-S FRS tC xA xB xD
Subaru BRZ Forester Impreza Legacy Outback WRX STI
Toyota 4Runner Camry Corolla FJ Cruiser Highlander Land Prius RAV4 Sienna
Volkswagen Beetle CC Eos Golf GTI Jetta Rabbit, etc

Product Features

  • One piece rigid LED circuit board strip, powered by 18-piece xeonn white SMD LED diodes
  • Come with (2) universal bulb fitment adapters to work with pretty much any car SUV trunk or cargo area OEM lamp socket
  • 12-inch wider lighting illumination area, much much brigher than any single LED trunk/cargo replacement bulb
  • Installation Tip: Step 1, pry open the OEM trunk/cargo lamp, replace the incandescent bulb inside, and plug in the adapter; Step2 2, close the lamp and then use the double-sided tape on the back of the LED strip to secure it
  • This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY

3 thoughts on “iJDMTOY 18-SMD-5050 LED Strip Light For Car Trunk Cargo Area or Interior Illumination, Xenon White”

  1. Brighter than expected, short cables, easy to install. Like, super easy. Pros: Super cheap. Much brighter than I expected. No drilling necessary for my install (rear hatch on a 2016 Subaru Crosstrek). Comes with two types of bulb-replacement plug-ins for installation.Cons: LEDs are not protected by any kind of housing. It’s lasted so far, but definitely not water resistant. Smaller than I expected (but brighter too, so this doesn’t matter).Installation: I do Search and Rescue, so wanted a bright light on the hatchback lid so I could see what…

  2. Light Strip Works great. Great Mod to Add Convenience to Your Car Length:: 0:10 Mins
    Length:: 0:10 Mins I really like this light strip. I installed in the trunk of my 2016 Sonata and the difference is really noticeable. I posted a picture and a video, which clearly shows the trunk is very well lit up, but neither really do it justice. It is super bright. The light the strip emits is a pure white light with just the slightest hint of blue. If you know anything about color temperature then I would equate the…

  3. Works great ! Check if it turns off. The light strip works perfect in my 2006 Audi a4 convertible. It took me less than 15 minuted to figure it out, with no instructions. Just pop out the bulb holder, remove the bulb, use the correct adapter for the bulb type, and then connect the strip on the other end of the bulb adapter. I highly recommend that you test if the light turns off when trunk is shut. I just put my phone camera on record in the trunk, then played the footage back to confirm the on/off. The car should cut power supply…

Leave a Reply

Your email address will not be published. Required fields are marked *