Features:
Dimensions:1.9″X0.9″
LED:3014
Color:White
Unique 360 degree lighting ensures optimum visibility
Bulbs are shock and vibration proof
Low heat generation ensures a longer bulb life
If you don’t like this product, Please click the Brand name or Search “LUYED”, you must be can find your favorite car LED products!
All LUYED products Support 3 months no reason return,If your have product issues,please do not hesitate to contact us
Product Features
- √ 2pcs 3157 78-pieces high power 3014 chipsets bulb,Working Voltage:12v-24v,Size: 1.9″ x 0.9″ x 0.8″
- √ Fits: 3156 3056 3356 3456 4156 3047 3157 3157A 3057 3155 3157NA 3357 3457 3457A 4057 4114 4157 etc.
- √ Application:back up reverse lights,brake lights,tail lights, etc.
- Notice: you might need to add 50W 6-Ohm load resistors or change flash rely to prevent the LED bulbs from hyper flashing,you can serch”50W 6-Ohm
- NOTE:Amazon filter system may not be 100% accurate, The bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm before placing an order.
Super bright! The pictures speak for themselves!!! Super bright!!!In the first picture (the back of the JeepWrangler) the left is the l.e.d bulb, the right is the original.In the third picture (the front of the Jeep) the left is the original, the right is the l.e.d bulb.The only issue that I found is that the turn signal flasher now works in hyper flash mode. I’m OK with that :))Update: These do not work as Tail/Brake lights on a 2013 Grand Cherokee!!!
Fit 2008 Wrangler JK but unfortunately blinkers still flash rapidly (need resistors) These LED bulbs fit easily and operated immediately when I pulled out the old bulbs and plugged in these new dual-intensity LED bulbs. Everything worked on the first try (i.e., without needing to lift or crimp the contact leads, etc.). The lights also functioned with two different levels of brightness as required (low light for night driving and high for braking).When I tested the bulbs with the key turned in the ignition but withOUT starting the engine, the flashing was normal…
STOP what you are doing and BUY these LEDs! 3157 bladed bulb replacement: JUST WOW! Deserves 6 stars! This was installed on my 2003 Harley FXD brake/tail light. The pics do NOT do justice to the major increase in brightness this LED has over a new halogen bulb. These pics were taken in the middle of a bright afternoon, and you can see the difference this LED makes. I might have to do a night comparison of both as I’m sure the LED will be many, many times brighter than the halogen. The LED was plug and play, no issues, no flickering,…