Features:
Dimensions:1.9″X0.9″
LED:3014
Color:White
Unique 360 degree lighting ensures optimum visibility
Bulbs are shock and vibration proof
Low heat generation ensures a longer bulb life
If you don’t like this product, Please click the Brand name or Search “LUYED”, you must be can find your favorite car LED products!
All LUYED products Support 3 months no reason return,If your have product issues,please do not hesitate to contact us
Product Features
- √ 2pcs 3157 78-pieces high power 3014 chipsets bulb,Working Voltage:9v-30v,Size: 1.9″ x 0.9″ x 0.8″
- √ Fits: 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc.
- √ Application:back up reverse lights,brake lights,tail lights, etc.
- √ Non-polarity design,Compatible for both CK/SRCK and Standard socket.
- Notice: you might need to add 50W 6-Ohm load resistors or change flash rely to prevent the LED bulbs from hyper flashing,you can serch”50W 6-Ohm”
Finally a LED bulb that does what it is advertised to do! Great product!I installed the white LEDs on my rear back up lights for my Jeep Wrangler.For the brake lights and front amber signal lights, I used the red and the amberLEDs by LUYED. The non-polarity LEDs are the way to go.These are very bright!The other brands I have used gave off very poor light quality.
They work, they’re bright, but your turn signal flasher might not like their low power usage level. On my 2007 Chrysler Town & Country, installation of these in the tail lights caused the known “fast flash” problem with the turn signals because these units consume so much less current that the turn signal flasher thinks they’re a burned-out conventional bulb. I happen to like the fast flash, however, so until I get the corresponding amber ones for the front, I’m leaving it alone. Once both the front and rear are LED, I’ll have to install a 6 ohm 50W resistor in parallel with each…
They don’t fit / work I can only give 2 stars because these do not fit my 2007 Chevy Suburban. I have this vehicle in my Amazon garage and it says they do fit, but no joy here. They will go into the socket slot but fall right back out again. They don’t ‘click’ in an anchor. I even tried using electrical tape to hold them into the GM factory socket, but neither one would light up (using these in the reverse lights). I checked the alignment of the wires with the original bulb and these, they seem to line up but again…