FEATURED Pyle PLG6C 6.5-Inch 400-Watt 2-Way Custom Component System
- 400-watt 2-way custom component system includes pair of woofers, tweeters, and crossovers
- 6.5-inch woofers with yellow poly injection cones and butyl rubber surrounds
- 0.5-inch silk dome tweeters with neodymium magnets and multiple mounting options
- Pair of passive crossover networks with 12 dB/octave slope
- 50 Hz to 22 kHz overall frequency response
1 pair 6 1/2″ mid bass speakers (200W rms/400W max)1-pair 1″ neodymium dome tweeters (50W RMS/100W max)1-pair of passive crossover worksSystem frequency response: 50Hz-24kHzIncludes grilles and mounting hardware
Part of Pyle’s Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware–it’s a perfect way to upgrade and expand the range of your factory system.
Quality sound for the budget-minded. Click to enlarge. |
Passive crossover network with 12 dB/octave slope. |
Silk dome tweeters with neodymium magnets and multiple mounting options. |
6.5-Inch Mid-Bass Speakers
These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you’ll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet.
1/2-Inch Tweeters
The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle’s mounting locations and get the best possible treble focus.
Passive Crossover Networks
Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound.
Easy Installation
A full wiring kit and all the installation hardware you’ll need to add this system to your vehicle are included, along with a wiring diagram.
About Pyle Audio
Pyle Audio’s legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems.
Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous.
PLG6C Specs
| Mid-Bass | |
|---|---|
| Size: | 6.5 inches |
| Magnet: | 40 ounces |
| Power handling: | 200 watts RMS / 400 watts max. |
| Impedance: | 4 ohm |
| Frequency response: | 50 Hz to 5 KHz |
| Mounting depth: | 2.65 inches |
| Tweeter | |
| Size: | 0.5 inches |
| Magnet: | Neodymium |
| Power handling: | 50 watts RMS / 100 watts peak |
| Frequency response: | 1.3 to 22 KHz |
| Impedance: | 4 ohm |
| Crossover Network | |
| Type: | Passive |
| Slope: | 12 dB / Octave |
What’s in the Box
Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.
Pyle Drive Gear 6 1/2″ Speaker Component Kit,
I drive a vehicle with four 6 1/2″ speakers in it. There’s room for tweeters in the vehicle, but the OEM system did not have them installed. The foam surround of all 4 OEM speakers had rotted away and of course they sounded terrible. I found these Pyle Drive Gear Speaker Kits and couldn’t believe the price break. I also liked the individual driver design. I ordered one Kit and installed it in the front of my vehicle. The difference was astounding. So astounding that I ordered another kit and installed it in the rear of my vehicle. I how have four 6 1/2″ woofers & 4 tweeters running through the enclosed crossovers that make it sound great and they’re only running off the OEM sound equipment! All that and Amazon free shipping to boot! I’m extremely satisfied, would do it again, and recommend these speakers.
Was this review helpful to you?
|Good Sound for the Price,
I put these into my 2001 Silverado a couple of weeks ago and they sound good. I have pushed them pretty hard with my amp settings and they take a lot of power before they start to distort. I definitely recommend buying these unless you want competition kind of sound which 99% of us do not.
Was this review helpful to you?
|Great kit for the money! Sounds very clean…good tweeters too,
I bought these to go into my 1996 Tacoma Extended Cab.
Unfortunately they didn’t fit into the door spaces (without spacers which I hadn’t bought and was lazy), since the 6.5″ woofer has a very nice large and deep magnet.
So I decided to install them into the side rear panels in the extended cab. They installed in no time, as all necessary pieces are included, including the wires with precrimped ends for both the tweeter and woofer.
I have these running of a JVC MoSFet deck pushing 30X4RMS and they sound great, had to turn the LOUD feature off as the base was rattling the panels, as Toyotas are made of plastic.
I just found out I could have bought some 1″ spacers to make the woofers fit in the door…oh well…bought some seperate 3-way speakers for the fronts…probably won’t sound as good…we’ll just have to see…I am installing the 3-ways tomorrow…
The Pyle woofers look great, with the yellow surround…
You also get 2 different tweeter install options…surface mount (either with double sided tape or screws) or flush mount…
The woofers also come with grill covers and the crossover looks to be built very nice…nothing in here feels or sounds cheap.
Was this review helpful to you?
|