BEAMTECH 880 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh 885 893 899 CSP Chips Conversion Kit

Light type: 880 885 (893, 899)
Input Power: L/25W,H/25W
Operating Voltage: DC9-32V
Luminous Flux: L/4000LM,H/4000LM
IP Rate: IP65
Light Source Model: CSP Chip
Color Temperature: 6500K
Heat Dissipation Theory: Aviation aluminum 6063
Operating Life: >30000hrs
Operating temperature: -40C to +80C

Product Features

  • 880 led headlight bulb, Newest Korean CSP LED chips (Double-sided) Producing 8000 lumens output, Super bright with output 4000lm per light for safety driving at night, 6500K xenon white color, far more than the halogen lamp and HID lamp.
  • Super long lifespan: > 30,000hrs, The power of each lamp only 25W, Waterproof driver and connectors level IP65.
  • Lamp low heat: far less than halogen lamp and HID lights, greatly prolongs the service life of lamps and lanterns.
  • Health and safety: no high voltage and large current startup, no circuit interference and electromagnetic radiation, No fan, driver smaller, installation easier, plug and play.
  • Good light beam pattern: with a narrow strip light of light emitting surface, close to the halogen design, rather than other products circular surface emitting.

3 thoughts on “BEAMTECH 880 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh 885 893 899 CSP Chips Conversion Kit”

  1. Completely silent, even light distribution I’ve used aftermarket HID kits for years, and a year ago switched to LEDs. While the brightness was nice, it had a noisy fan in the back that made a high-pitched whirring sound that I couldn’t get used to. Hence why I purchased these BEAMTECH LED bulbs with passive cooling.Not only are they completely silent, but the light distribution is also much more even, as you can see in my picture. Driver side is the BEAMTECH, passenger is the older LED bulb. Also note that these BEAMTECH…

  2. Work on ’11 Toyota Corolla S This is an update on prior review.Originally I returned the headlights as they did not light up on my car.* BEAMTECH contacted me and extended their apologies for the product not meeting my expectations.* BEAMTECH did ITS OWN research about my car’s light housing and figured I needed an additional connector* A new set of headlight along with connectors were sent right away.* Now I am runnign LEDs for my DRLs and HighBeamsI suggest that if…

  3. Update: H11 bulb works great on my new 2019 Subaru Ascent and previous 2017 Subaru Impreza. Great and affordable led bulb. I had previously tried another brand that costs more but the output wasn’t correct (see my other review) so I am returning it. I thought I try another brand and ordered this one. I tested one and the output worked with 2017 Subaru Impreza. The light output was almost perfect matching the halogen but only stronger. There is a cut off line, so no blinging other drivers.I’ll report later on what I find using it more.UPDATE: 4-Aug-2018I recently bought the new…

Leave a Reply

Your email address will not be published. Required fields are marked *