Elite Vision Advanced Automotive Accessories – Elite LED Conversion Kit 9006 / HB4 for Bright White Headlights Bulbs, Low Beams, High Beams, Fog Lights

Elite Vision Advanced Automotive Accessories Elite LED Conversion Kit – 9006 – 30w 7600Lm 6k White Cree Chips Low Wattage to Extend Life: EV LED Conversion kits were engineered specifically to run on lower wattage while still exceeding brightness expectations. This will most importantly give the LED a longer lifespan because of how cool it runs. Best of Both Worlds: Bright Cree LED chips, along with the projection technology developed, EV’s LED kits are made to give off a proper beam pattern with the technology that is on top of the bright Cree LED chip. CanBus Functionality: Some newer cars are equipped with CanBus systems, therefore the LED will need extra load resistors, which were engineered inside the LED kits to work on those vehicles to prevent flickering of the LED kits. NO MODIFICATION NEEDED: Everything included in our LED Kits will make your install process a breeze. Works for all vehicles! Whether you are changing your low beam, high beam, or fog light, it is as simple as taking the stock halogen bulb out, and plugging in your new EV LED kit. Attention 2007+ Chrysler/RAM/Dodge/Jeep. Resistors are recommended for your vehicle to work properly as they have more sensitive modules. If resistors are not installed, it may cause flickering, error codes on the dash, or even failure of the module. Inline resistors are offered as an optional accessory and are recommended if you have one of the above vehicles. Resistors are also simple plug and play, and do not need any modifications on vehicles. Elite Vision Advanced Automotive Accessories LED Kits are made to replace your stock halogen bulbs only. They will not replace your OEM HID or LED headlights.

Product Features

  • Clear 6000K that is optimized for the best color to maximize visibility! Pushing 3600Lms per bulb!
  • Cree LED Chips that are engineered for proper beam pattern (no dark spots!) and lasting over 50,000 running hours, meant to last longer than you’ll own the car!
  • HEAVY DUTY Resistance! The entire LED Bulb and fan is built to work under intense temperatures/vibrations, and also cools the LED underwater too!
  • Plug and Play System. Elite LED Kits are made with replace your stock halogen bulbs with no modifications. Check your owner’s manual to confirm the bulb type that you need for your desired replacement.
  • Our products include a 1-year warranty, and lifetime technical support through Elite Vision Advanced Automotive Accessories!

3 thoughts on “Elite Vision Advanced Automotive Accessories – Elite LED Conversion Kit 9006 / HB4 for Bright White Headlights Bulbs, Low Beams, High Beams, Fog Lights”

  1. Wow! Worth the money I recommend the company and product. It looks great. It fit my 2010 Chevrolet Equinox perfectly.Important note: When I first attempted to place I thought it didn’t fit because I was having a difficult time inserting it. After I took a break and looked at the 3 wings I noticed that 1 was slightly larger then the other 2. I then looked at the slots closely and noticed the same thing….yup it was all me. Once I lined them up correctly it was earlier to insert and twist. 🙂 Again, I…

  2. improvement over stock headlamps On my 2016 Camry the headlights are much brighter. The length of the beam is about the same with a good cut off. Now they do not perform better or close to factory LED lights but for the money not a bad upgrade .They are a improvement over stock. The only issue I have with these is that when the driving lights are on they flicker. The flickering goes away when I turn on the headlights.

  3. So much better Installed these on my RAM a while ago and it is so much brighter my stock bulbs. The installation process took less than 30 minutes for both the top and the bottom, and what a difference!

Leave a Reply

Your email address will not be published. Required fields are marked *