Made out of High Quality T6061 Aircraft Aluminum.
Multiple mounting location available to avoid license plate from blocking intake vents or light beam.
Oval mounting adapter included for license plate angle adjustment.
Hardware included:
License plate holder x 1
Oval mounting adapter x 1
7mm Spacer x 1 (for more clearance if needed)
Rubber washer x 1 (prevent the unit from loosening)
T6061 aircraft aluminum tow rod x 1
License plate bolt x 4
Hex Wrench x 2
Hex Head screws x 3
Product Features
- Application: 2014-Up Chevrolet Corvette Z06 | Gran Sport ( Important Note: Does NOT Fit Base Models )
- Multiple Mounting Location to Ensure Plate will not Block Intake Vents or Lights.
- Angle Adjustment on oval adaptor to Follow the Curve of Front Bumper.
- Easy Installation, No Drilling is Required.
- Make of High Quality T6061 Aircraft Aluminum.
High Quality license plate holder for 2014+ C7 Corvette using Tow Hook mount The plate and all materials are of top notch metal (presumed aluminum) with a durable powder coating. It sticks out a bit far from my bumper but otherwise is very nice. The 2014 Corvettes don’t come with a factory tow hook port, so check your car first! I had one installed aftermarket just so I could use this license plate holder… total cost $70 for this, $370 for set of hooks (for towing) and brackets, and $240 for labor to install. 2015 C7’s and up won’t need to worry because you have tow…
Performing, was missing connecting screw The materials the holder is constructed of are high quality, no issue with that. I did have two issues, 1st, the screw that holds the plate holder to the tow hook bolt was missing. I contacted Exteme Online and they sent me the missing screw. The 2nd issue is the tow hook bolt was loose when screwed as far in as possible, the grill of the Z06 limited how far the bolt could be screwed in. I used thread locker to firm up the bolt, in my opinion, the bolt could have been an inch or two longer to…
Works 4 me Easy to install and make minor adjustments. Fits my 2018 ZO6.