iJDMTOY (20) Brilliant Red 12V LED Emitter Lights For Tail Lamps, Brake Lights, Angel Eyes Halo Rings or Headlight Retrofit DIY use

This page features one set (20 pieces) 5mm (F5) round head 12V LED emitters for car exterior or interior lighting retrofit or decoration.

Features
Universal fit
Brilliant Red
20 pieces
12V
Used for exterior such as tail lamps, brake lights, halo angel eyes, headlights, daytime running lights or fog lights retrofit
Or for car interior such as foot area lights, cluster lights, etc
Some drilling and wiring DIY required so we recommend professional installation for this product

Product Features

  • Universal fit 20 pieces
  • Sports Brilliant Red Color
  • Used for exterior such as tail lamps, brake light, headlights, halo angel eyes, daytime running lights or fog lights retrofit or for car interior such as foot area lights, cluster lights, etc
  • Some drilling and wiring DIY required so we recommend professional installation for this product
  • This is an iJDMTOY® Trademark Brand product, exclusively available at iJDMTOY®

3 thoughts on “iJDMTOY (20) Brilliant Red 12V LED Emitter Lights For Tail Lamps, Brake Lights, Angel Eyes Halo Rings or Headlight Retrofit DIY use”

  1. Cool LED”S These little lights have to be one of the brightest I’ve seen in a while. I used them in the headlamp area of my truck and they light up the entire area with ease. Like the product information states there is some wiring that you will have to do or have done but it’s well worth it for the look you are going for. The one thing I have to say is that the price is a little steep for 20 Led lights that you have to install yourself or have a professional do for you. $20.00 dollars can turn into…

  2. These are definitely bright and were easy to install in my customized alteration to a receiver … These are definitely bright and were easy to install in my customized alteration to a receiver cap (in which I drilled holes for the LEDs to extend through and illuminate once the brakes are applied). I would have given them five stars, but it was not clear they were waterproof at the ends near the LEDs. I used silicone on both sides of the cap to ensure the LEDs were waterproofed, and the silicone “blob” over each LED actually increases the appearance of each LED as it illuminates -…

  3. Cool LED’S There are a few things that make this product worth the money. They make your old car look newer with the style it gives off, there are a few things that set it back, like the wiring, the lack of information ie: hole size for sung fit, and recommended fuse size for the lights, but a little math will help you figure that out. Over all, they are simply amazing to look at and they are very bright.

Leave a Reply

Your email address will not be published. Required fields are marked *