Partsam 1SET 3157 4114 4057 6-Cree-XB-D Genuine Chip White 30W High Power LED Replacement for Fog Driving Light Lamps for GMC Canyon CHEVROLET Colorado

Specificaiton:

Voltage: 12V AC/DC

Color: Super White 7000K

LED chip: 6*5w cree HP chip

Power consumption: 30W

Lumens: 450-600LM

Socket type: 3157 3057

Interchange Part number: 3047, 3057, 3157 ,3357, 3457, 4057, 4114, 4157

Feature

Low power consumption, High performance.

Easy installation, just plug play.

Light weight, long lasting.

Application: Backup Light/ Reverse Light

Notice:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles:Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.

If you want to purchase the load resistor, please search in our Store.

Package Includes: 2x Backup LED Light Bulbs

Product Features

  • 3157 4157 4114 6-Cree-XB-D 30W High Power LED White 7000K Ultra Bright Backup Reverse Light; Color: Super White 7000K LED chip: 6*5w cree HP chip Power consumption: 30W Brightness: 450-600LM
  • Interchange Part number: 3047, 3057, 3157 ,3357, 3457, 4057, 4114, 4157 Application/Usage: Backup Light/ Reverse Light;IMPORTANT NOTICE!!!Please make sure your car circuit is working well before installation, as the bulbs will be burn may occur if there is a current spike or volte leak in your vehicle after the new bulb installed, it is not the issue of Partsam product quality!!!
  • IMPORTANT NOTICE!!!If you are not sure your socket type ck or standard , please use the keyword (CK or Standard Test) on youtube ,the video will show you how to test the socket.( please check before placing an order , Our bulbs come with Standard Base(SK Type), NOT CK Type, put standard bulbs into CK type sockets , the bulb will not work or only the amber turns on while the white doesn’t, also POP THE FUSE may occur.– Most TOYOTA vehicle use CK socket.
  • IMPORTANT NOTICE!!!(1)Don’t forget Risistors if flashing,Blinking or Code error problems occurrs!!!(2)If you bulb does not light or occurrs blinker, please check if your relay is broken and whether your socket is senescent or not.!!!(3)For 7443 and 3157,please raise the pin when installing the bulbs if your bulb does not light or occurrs blinker
  • Fit for 07-13 CHEVROLET Silverado,07-14 GMC Sierra,2000-2005 BUICK LeSabre,1997-2005 BUICK Park Avenue,2002-2007 BUICK Rendezvous,1990-1994 CADILLAC DeVille 1995-2005 CHEVROLET Cavalier,2004-2012 CHEVROLET Colorado,1994-2004 CHEVROLET Pickup, S-10,2005-2010 CHRYSLER 300C,96-07 DODGE Caravan

3 thoughts on “Partsam 1SET 3157 4114 4057 6-Cree-XB-D Genuine Chip White 30W High Power LED Replacement for Fog Driving Light Lamps for GMC Canyon CHEVROLET Colorado”

  1. A bright light for brakes. A very bright brake/tail replacement light on my 2010 Honda pilot. But, I also wanted to use them in the upper socket which is the night running light and the rear turn signal. As a turn signal, it flashes fast as the flasher relay is expecting more current draw, and sensing a low draw, it assumes something is wrong so it flashes at a high rate. No one seems to sell a flasher power relay for switching to LED. I replaced both brake lights of course, now just using them to see how they…

  2. Install went just fine with these into my 2057 socket (1999 Escalade front … Install went just fine with these into my 2057 socket (1999 Escalade front turn signals/parking light) the DRL are very bright light and about 5000-6000 kelvin. The resistors were very easy to install and I added tape and anti corrosion to help the connection last the elements. The turn signals flash a VERY bright Amber-off-amber off until you are done using them. Than about 1 second later they switch back to the WHITE DRL. Very nice. We’ll see how they last should be just fine. I had 4…

  3. Work perfectly. Resistors too nice! These were a very easy install. Glad they came with resistors. They look great on my car. Took longer to get my stock bulbs out. They make it a super pain in the nards ony 06 Maxima. Make sure you go from the blinker wire to the negative with the resistors. Don’t use the parking light wire as it will become hot. There are a few videos on YouTube that demonstrate how to install them, that is what I used.Very happy with them.

Leave a Reply

Your email address will not be published. Required fields are marked *