Color: 6000K xenon white
Voltage: DC 12~24V
LED Chips: 72 pcs high power 3014 SMD LED chips
Cross reference: 1156, BA15S P21W 1003 1073 1073LL 1095 1141 1141LL 1156A 1156NA 1156ALL 1156LL 1195 12088 1295 1295NA 199 2396 3497 3497LL 631 631LL 7506 7506L 7506ST 7506LL 93 93LL 97 97A 97LL 97NA etc.
Appalication: back up reverse lights,turn signal lights,tail lights,daytime running lights etc.
Please note: Load resistor might be needed to avoid signal hyper flashing or error code.
Product Features
- (Set of 2) 1000 lumens per bulb, total 2000 lumens for both LED 1156 bulbs. 72 pcs high power & high brightness 3014 SMD LED chips, 360 degree light output; Voltage: DC 12V-24V, Color: 6000K xenon white; Size:1.65″ long and 0.67″ in diameter.
- Advantage: no polarity design. Intelligent constant current IC, 6063 aluminum for excellent heat dissipation, low temperature long term lasting.
- Application: back up reverse lights,turn signal lights,tail lights,daytime running lights etc.
- Cross reference number: 1156 BA15S P21W 1003 1073 1073LL 1095 1141 1141LL 1156A 1156NA 1156ALL 1156LL 1195 12088 1295 1295NA 199 2396 3497 3497LL 631 631LL 7506 7506L 7506ST 7506LL 93 93LL 97 97A 97LL 97NA etc. Please check the owner manual or stock bulb size before purchasing as Amazon fitment system may not be 100% accurate.
- ONE YEAR warranty. Load resistor might be needed to avoid signal hyper flashing or error code issue.
Yes, it is bright, but… Yes, the light is bright, but the fit is not the best. It took some wiggling around to get it to work. I am hoping it does not wiggle because it will stop working. Also it is much longer than stock lights. For the price though, not bad. I will keep my stock lights and a screwdriver in the vehicle just in case. Quick fix!Update… Yes, the hazards worked, but not the turn signals… Hyper Flash!! Sent them back.
Brighter than Incandescent bulb I replaced a combination tail/brake light bulb in my motorcycle with one of these bulbs and it’s noticeably brighter than the incandescent original. And there’s a definite difference in brightness between the tail light and brake light when applied. They also modulate (blink) fine with a brake light modulator installed. Very happy with these bulbs.
They don’t blink and not very bright These bulbs do light up but they do NOT work for turn signals which they claim to do. I did install a new flasher to deal with LED bulbs and it works great because the amber bulbs I installed in the front worked great.These bulbs are not very bright either I have a different brand of red LED bulb as running lights right next to these and they are not nearly as bright. They are about the same brightness as the original 1157’s that I took out of the car.