R2 CSP Seoul 9005 8000LM LED Headlight Conversion Kit, High beam headlamp, Low beam headlights, Fog light, HID or Halogen Head light Replacement, 6500K Xenon White, 1 Pair- 1 Year Warranty

If your DRL share the same bulb with headlights,this maybe too powerful to light up in DRL mode.
Note: There is polarity in the plug,so if the bulb did not light up one way,please turn the plug 180 degree and plug in again.

Why VoRock8 R2 ?

* Great Fitment
– Smallest headlight kit in market, no more modification on headlight housing or cover. Perfect choice if you want to upgrade your headlights to LED type.
* GREAT Light Output
– Seoul Y19 Chip- CSP technology, great emission efficiency. Light output can reach 4000LM per bulb; Dual-sided Chip design emit great light pattern
* BETTER Heat Dissipation
– Built with cold pressed aluminum housing and with built in Japanese 2 ball fan cooling system on the bottom. Optimal heat dissipation provide longer lifespan.
* Rain resistant
– IP65 waterproof makes it can work in any bad weather conditions.
* EASY INSTALL
– All in One Plug & play design: Compact Design with Built in Driver/Ballast.
!!! NOTE: For some high powered cars, canbus decoders maybe required to fix lightning disorder, blinking-off, error codes etc.

Specs:
– Fitment part#:9005 H10 9145 HB3.
– Application: High beam headlights,Fog lights,DRL lights
– Material: Cold pressed Aviation aluminum.
– Color temp: 6000-6500k white
– Lumens: 4000LM each
– Light Source: Seoul Y19 Chip
– Operating Voltage: 12v-24V
– Waterproof Rate: IP 65
– Light angle: 360 degree
– Life Span: >30000 Hours

Package:
– 2* LED headlight kit
– 1* Manual

Product Features

  • !!!POLARITY SENSITIVE in the plug,For some vehicles,like many Honda vehicles,their polarity is reversed,you need to reverse polarity of the bulb plug and cut the little clip on the plug to plug it in all the way for a tight connection.So if it can not light up,please try this.
  • If your DRL share the same bulb with your headlight,this LED kit can be too powerful to function as DRL properly.For the same model,there is no brightness difference between a high beam and a low beam bulb,lumens is the same.only difference is the light dispersion which is depend on your headlamp lens.high beam light is high and far.low beam light is low and wide.
  • SMALLEST Led kit in market:4000lm each.8000LM per Pair.Can fit inside most cars because of its size, no more modification required on the headlight housing or cover.CSP Chip focused beam technology.Perfect Light Pattern w/o dark spot.6000-6500K white,DOT complied.
  • Cold-pressed Aviation grade aluminum heat sink with built-in 2 ball fan for optimal heat dissipation.All in One Plug & play design,Compact Design with Built in Driver/Ballast. For some high powered cars, canbus decoders maybe required to fix lightning disorder, blinking-off, error codes etc.
  • Fit: 9005,HB3. Aftermarket LED Headlights, perfect replacement for HID & Halogen Lights.Apply to High Beam headlamp.We also have canbus decorder for sale, if your car have error code or flickering issues after installation.

3 thoughts on “R2 CSP Seoul 9005 8000LM LED Headlight Conversion Kit, High beam headlamp, Low beam headlights, Fog light, HID or Halogen Head light Replacement, 6500K Xenon White, 1 Pair- 1 Year Warranty”

  1. Nice lights I bought these lights for my motorcycle and they are super bright, easy to install just plug in, I have not try them out on the road because of the rainy and cold weather, but so far I’m very satisfied. Will find out later.

  2. Love led lights I love the lights couldn’t see real well with the silver stars. But with the led it’s a nice white light high beams don’t chance much from low beams but to be honest you don’t really need high beams with them

  3. Very had to install without changing polarity, etc. Can only say two things good about these lights, they are bright and they are white. I agree the “fit” a 2011 Dodge Journey, but they do not work out of the box. You have to change the polarity, and that means (go do it right) you have to cut open the wires reconnect black to red and red to black, twist and solder (if you don’t want them to come apart), use shrink tubing to seal or tape very well. Next the collar on both lights cam off and I had to glue them back together. So to…

Leave a Reply

Your email address will not be published. Required fields are marked *